Debug Platform Snmp - Cisco Catalyst 3750-X Command Reference Manual

Cisco ios release 15.2(1)e and later

Hide thumbs Also See for Catalyst 3750-X:

Table of Contents

debug platform snmp

Use the debug platform snmp privileged EXEC command to enable debugging of the

platform-dependent Simple Network Management Protocol (SNMP) software. Use the no form of this

command to disable debugging.

Syntax Description

This command has no arguments or keywords.

Debugging is disabled.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

The undebug platform snmp command is the same as the no debug platform snmp command.

When you enable debugging on a switch stack, it is enabled only on the stack master. To enable

debugging on a stack member, you can start a session from the stack master by using the session

switch-number privileged EXEC command. Then enter the debug command at the command-line

prompt of the stack member. You also can use the remote command stack-member-number LINE

privileged EXEC command on the stack master switch to enable debugging on a member switch without

first starting a session.

Related Commands

show debugging

Catalyst 3750-X and 3560-X Switch Command Reference

debug platform snmp

no debug platform snmp

Modification

This command was introduced.

Displays information about the types of debugging that are enabled.

Catalyst 3750-X and 3560-X Switch Debug Commands

Catalyst 3560-x