Match (Access-Map Configuration) - Cisco Catalyst 3750-X Command Reference Manual
Cisco ios release 15.2(1)e and later
Hide thumbs
Also See for Catalyst 3750-X:
- Software configuration manual (1438 pages) ,
- Message manual (150 pages) ,
- Getting started manual (22 pages)
Table of Contents
Advertisement
Chapter 2
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
match (access-map configuration)
Use the match access-map configuration command on the switch stack or on a standalone switch to set
the VLAN map to match packets against one or more access lists. Use the no form of this command to
remove the match parameters.
This command is not supported on switches running the LAN base feature set.
Note
Syntax Description
ip address
mac address
name
number
Defaults
The default action is to have no match parameters applied to a VLAN map.
Command Modes
Access-map configuration
Command History
Release
12.2(53)SE2
Usage Guidelines
You enter access-map configuration mode by using the
You must enter one access list name or number; others are optional. You can match packets against one
or more access lists. Matching any of the lists counts as a match of the entry.
In access-map configuration mode, use the match command to define the match conditions for a VLAN
map applied to a VLAN. Use the action command to set the action that occurs when the packet matches
the conditions.
Packets are matched only against access lists of the same protocol type; IP packets are matched against
IP access lists, and all other packets are matched against MAC access lists.
Both IP and MAC addresses can be specified for the same map entry.
OL-29704-01
match {ip address {name | number} [name | number] [name | number]...} | {mac address {name}
[name] [name]...}
no match {ip address {name | number} [name | number] [name | number]...} | {mac address
{name} [name] [name]...}
Set the access map to match packets against an IP address access list.
Set the access map to match packets against a MAC address access list.
Name of the access list to match packets against.
Number of the access list to match packets against. This option is not valid for MAC
access lists.
Modification
This command was introduced.
vlan access-map
global configuration command.
Catalyst 3750-X and 3560-X Switch Command Reference
match (access-map configuration)
2-381
Advertisement
Table of Contents
