Chapter 2 Catalyst 2960 Switch Cisco Io Command - Cisco Catalyst 2960 Command Reference Manual

Hide thumbs Also See for Catalyst 2960:

Table of Contents

aaa accounting dot1x

AAA accounting is disabled.

Command Modes

Global configuration

Command History

Usage Guidelines

This command requires access to a RADIUS server.

We recommend that you enter the dot1x reauthentication interface configuration command before

configuring IEEE 802.1x RADIUS accounting on an interface.

This example shows how to configure IEEE 802.1x accounting:

Switch(config)# aaa new-model

Switch(config)# aaa accounting dot1x default start-stop group radius

The RADIUS authentication server must be properly configured to accept and log update or watchdog

packets from the AAA client.

Related Commands

aaa authentication

aaa new-model

dot1x reauthentication

dot1x timeout

reauth-period

Catalyst 2960 Switch Command Reference

Modification

This command was introduced.

Specifies one or more AAA methods for use on interfaces running

IEEE 802.1x.

Enables the AAA access control model. For syntax information, see the

Cisco IOS Security Command Reference, Release 12.2 > Authentication,

Authorization, and Accounting > Authentication Commands.

Enables or disables periodic reauthentication.

Sets the number of seconds between re-authentication attempts.

Catalyst 2960 Switch Cisco IOS Commands