Show Mvr Interface - Cisco Catalyst 2960 Command Reference Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
show mvr interface
show mvr interface
To use this command, the switch must be running the LAN Base image.
Note
Use the show mvr interface privileged EXEC command without keywords to display the Multicast
VLAN Registration (MVR) receiver and source ports. Use the command with keywords to display MVR
parameters for a specific receiver port.
Syntax Description
interface-id
members
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(25)FX
Usage Guidelines
If the entered port identification is a non-MVR port or a source port, the command returns an error
message. For receiver ports, it displays the port type, per port status, and Immediate-Leave setting.
If you enter the members keyword, all MVR group members on the interface appear. If you enter a
VLAN ID, all MVR group members in the VLAN appear.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mvr interface command:
Switch# show mvr interface
Port
----
Gi0/1
Catalyst 2960 Switch Command Reference
2-428
show mvr interface [interface-id [members [vlan vlan-id]]] [ | {begin | exclude | include}
expression]
(Optional) Display MVR type, status, and Immediate Leave setting for the
interface.
Valid interfaces include physical ports (including type, module, and port
number.
(Optional) Display all MVR groups to which the specified interface belongs.
(Optional) Display all MVR group members on this VLAN. The range is 1
to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Type
----
SOURCE
Status
Immediate Leave
-------
---------------
ACTIVE/UP
DISABLED
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
OL-8604-04
Advertisement
Table of Contents
