Cisco Catalyst 2960 Command Reference Manual page 227

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Catalyst 2960 Switch Cisco IOS Commands

This example shows how to create a class map called class2, which matches all the incoming traffic with

DSCP values of 10, 11, and 12:

Switch(config)# class-map class2

Switch(config-cmap)# match ip dscp 10 11 12

Switch(config-cmap)# exit

This example shows how to create a class map called class3, which matches all the incoming traffic with

IP-precedence values of 5, 6, and 7:

Switch(config)# class-map class3

Switch(config-cmap)# match ip precedence 5 6 7

Switch(config-cmap)# exit

This example shows how to delete the IP-precedence match criteria and to classify traffic using acl1:

Switch(config)# class-map class2

Switch(config-cmap)# match ip precedence 5 6 7

Switch(config-cmap)# no match ip precedence

Switch(config-cmap)# match access-group acl1

Switch(config-cmap)# exit

You can verify your settings by entering the show class-map privileged EXEC command.

Related Commands

show class-map

Creates a class map to be used for matching packets to the class whose name

you specify.

Displays quality of service (QoS) class maps.

match (class-map configuration)

Catalyst 2960 Switch Command Reference