Cisco Catalyst 2960 Command Reference Manual page 147

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Catalyst 2960 Switch Cisco IOS Commands

This example shows how to configure the IP address for the Layer 2 switch on a subnetted network:

Switch(config)# interface vlan 1

Switch(config-if)# ip address 172.20.128.2 255.255.255.0

You can verify your settings by entering the show running-config privileged EXEC command.

Related Commands

show running-config

Displays the running configuration on the switch. For syntax information,

select Cisco IOS Configuration Fundamentals Command Reference,

Release 12.2 > File Management Commands > Configuration File

Management Commands.

Catalyst 2960 Switch Command Reference