Show Boot - Cisco Catalyst 2960 Command Reference Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
show boot
Use the show boot privileged EXEC command to display the settings of the boot environment variables.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(25)FX
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output from the show boot command.
display.
Switch# show boot
BOOT path-list: flash:c2960-lanbase-mz.122-25.FX.bin
Config file:
Private Config file: flash:/private-config
Enable Break:
Manual Boot:
HELPER path-list:
NVRAM/Config file
OL-8604-04
show boot [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
flash:/config.text
no
yes
buffer size:
32768
Table 2-16
describes each field in the
Catalyst 2960 Switch Command Reference
show boot
2-303
Advertisement
Table of Contents
