Cisco Catalyst 2960 Command Reference Manual page 508

Hide thumbs Also See for Catalyst 2960:

Table of Contents

snmp-server host

This example shows how to configure a unique SNMP community string named comaccess for traps and

prevent SNMP polling access with this string through access-list 10:

Switch(config)# snmp-server community comaccess ro 10

Switch(config)# snmp-server host 172.20.2.160 comaccess

Switch(config)# access-list 10 deny any

This example shows how to send the SNMP traps to the host specified by the name myhost.cisco.com.

The community string is defined as comaccess:

Switch(config)# snmp-server enable traps

Switch(config)# snmp-server host myhost.cisco.com comaccess snmp

This example shows how to enable the switch to send all traps to the host myhost.cisco.com by using the

community string public:

Switch(config)# snmp-server enable traps

Switch(config)# snmp-server host myhost.cisco.com public

You can verify your settings by entering the show running-config privileged EXEC command.

Related Commands

show running-config

snmp-server enable traps

Catalyst 2960 Switch Command Reference

Displays the running configuration on the switch. For syntax information,

select Cisco IOS Configuration Fundamentals Command Reference,

Release 12.2 > File Management Commands > Configuration File

Management Commands.

Enables SNMP notification for various trap types or inform requests.

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands