Cisco Catalyst 2960 Command Reference Manual page 95

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Catalyst 2960 Switch Cisco IOS Commands

This example shows how to globally enable IEEE 802.1x authentication on a switch:

Switch(config)# dot1x system-auth-control

This example shows how to globally enable the optional guest VLAN behavior on a switch:

Switch(config)# dot1x guest-vlan supplicant

You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC

Related Commands

dot1x critical (global

configuration)

dot1x guest-vlan

dot1x port-control

interface-id]

Configures the parameters for the inaccessible authentication bypass

feature on the switch.

Enables and specifies an active VLAN as an IEEE 802.1x guest VLAN.

Enables manual control of the authorization state of the port.

Displays IEEE 802.1x status for the specified port.

Catalyst 2960 Switch Command Reference