Table of Contents
Advertisement
F1 is the "Send all characters" command
0D is the hex value for a CR
The data is output as:
37692
<CR>
Search backward for a non-matching character
E7 Search the input message backward for the first non-"xx" character from the current cursor position, leaving the cursor
pointing to the non-"xx" character. Syntax = E7xx where xx stands for the search character's hex value for its ASCII
code.
Refer to the
ASCII Conversion Chart (Code Page 1252),
Miscellaneous Commands
Suppress characters
FB Suppress all occurrences of up to 15 different characters, starting at the current cursor position, as the cursor is
advanced by other commands. When the FC command is encountered, the suppress function is terminated. The
cursor is not moved by the FB command.
Syntax = FBnnxxyy . .zz where nn is a count of the number of suppressed characters in the list, and xxyy .. zz is the list
of characters to be suppressed.
FB Example: Remove spaces in bar code data
This example shows a bar code that has spaces in the data. You may want to remove the spaces before sending the
data. Using the bar code above:
Command string: FB0120F10D
FB is the "Suppress characters" command
01 is the number of character types to be suppressed
20 is the hex value for a space
F1 is the "Send all characters" command
0D is the hex value for a CR
The data is output as:
34567890
<CR>
Stop suppressing characters
FC Disables suppress filter and clear all suppressed characters. Syntax = FC.
Replace characters
E4 Replaces up to 15 characters in the output message, without moving the cursor. Replacement continues until the E5
command is encountered. Syntax = E4nnxx
in the list (characters to be replaced plus replacement characters); xx
replacement characters, continuing through zz
E4 Example: Replace zeros with CRs in bar code data
If the bar code has characters that the host application does not want included, you can use the E4 command to
replace those characters with something else. In this example, you will replace the zeroed in the bar code above with
carriage returns.
Command string: E402300DF10D
E4 is the "Replace characters" command
beginning on page A-3 for decimal, hex and character codes.
xx
yy
yy
...zz
zz
where nn is the total count of the number of characters
1
2
1
2
1
2
defines characters to be replaced and xx
1
and zz
.
1
2
defines
2
8 - 9
- Quick Links:
- Configuring the 2700
Hide quick links:
Advertisement
Table of Contents
