Table of Contents
Advertisement
GS1 DataBar Expanded
Default All GS1 DataBar Expanded Settings
GS1 DataBar Expanded On/Off
* On
Off
Note: Contact
Technical Assistance
(page 16-1) for help if you have difficulty with GS1 DataBar Expanded bar codes.
GS1 DataBar Expanded Redundancy
If you are encountering errors when reading GS1 DataBar Expanded bar codes, you may want to adjust the redundancy
count. Redundancy adjusts the number of times a bar code is decoded before transmission, which may reduce the number
of errors. Note that the higher the redundancy count, the longer it will take to decode the bar code. To adjust the redun-
dancy, scan the GS1 DataBar Expanded Redundancy bar code below, then scan a redundancy count between 0 and 10
on the
Programming Chart
inside the back cover of this manual. Then scan the
Save
bar code. Default = 0.
GS1 DataBar Expanded
Redundancy
GS1 DataBar Expanded Message Length
Scan the bar codes below to change the message length. Refer to
Message Length Description
(page 9-1) for additional
information. Minimum and Maximum lengths = 4-74. Minimum Default = 4, Maximum Default = 74.
Minimum Message Length
Maximum Message Length
9 - 58
- Quick Links:
- Configuring the 2700
Hide quick links:
Advertisement
Table of Contents
