Table of Contents
Advertisement
Is the bar code displayed but not entered?
The bar code is displayed on the host device correctly, but you still have to press a key to enter it (the Enter/Return key or
the Tab key, for example).
• You need to program a suffix. Programming a suffix enables the scanner to output the bar code data plus the key you
need (such as "CR") to enter the data into your application. Refer to
information.
Does the scanner read the bar code incorrectly?
If the scanner reads a bar code, but the data is not displayed correctly on the host screen:
• The scanner may not be programmed for the appropriate terminal interface.
For example, you scan "12345" and the host displays "@es%."
Reprogram the scanner with the correct interface bar code. See
page 3-1.
• The scanner may not be programmed to output your bar code data properly.
For example, you scan "12345" and the host displays "A12345B."
Reprogram the scanner with the proper symbology selections. See
The scanner won't read your bar code at all.
1. Scan the sample bar codes in the back of this manual. If the scanner reads the sample bar codes, check that your bar
code is readable.
Verify that your bar code symbology is enabled (see
2. If the scanner still can't read the sample bar codes, scan
If you aren't sure what programming options have been set in the scanner, or if you want the factory default settings
restored, refer to
Resetting the Factory Defaults
Are the scanner's red and green indicators flashing or solidly lit?
The host system may be disabling the Stratos. Make sure that:
• The host system is not sending a disable command to the scanner.
• The host communication cable is properly attached to the host and to the scanner.
Diagnostic Indicator
There is an LCD diagnostic display located under the platter near the end of the scanner closest to the vertical window.
15 - 2
Prefix/Suffix Overview
Programming the Bioptic Scanner Interface,
Chapter
Chapter
9).
All Symbologies
on page 12-3.
LCD Diagnostic Display
on page 7-1 for further
9.
On, page 9-1.
beginning on
- Quick Links:
- Configuring the 2700
Hide quick links:
Advertisement
Table of Contents
