Table of Contents
Advertisement
Item
Indication
NEAR END
Displays the NEAR END value of
the power supply selected with
DCIN TYPE.
END
Displays the END value of the
power supply selected with DCIN
TYPE.
The only items that can be changed on this page
are the two TYPE items (BATT TYPE and DCIN
TYPE), which specify the type of battery or
power supply to check. If you want to change the
values, use the <BATT ALARM SET> page of
the Camera >MAINTENANCE menu.
Detailed Function
Settings
You can use the <SW ASSIGN 1> and <SW
ASSIGN 2> pages of the Camera >USER
(OPERATION) menu to assign functions to the
assignable buttons/switch, in the same way that
you assign functions using the subdisplay. You
can also set the operation mode of the MENU
SEL/ENTER dial.
<SW ASSIGN 1> page
<SW ASSIGN 2> page
Assigning functions to the assignable
buttons/switch
Move the cursor to one of the ASSIGN SW1 to
ASSIGN SW8 lines, or to the ASSIGN SWN or
ASSIGN SWC line, and then press the MENU
SEL/ENTER dial. The settings page for the
corresponding assignable button/switch appears.
Assign functions in the same way that you assign
functions in the subdisplay.
For the assignable functions, see "Assigning
Functions to Assignable Buttons/Switch" (page 53).
Detailed Function Settings
69
Advertisement
Table of Contents
