Table of Contents
Advertisement
Connecting the Console and Auxiliary Port Cables
http://www.cisco.com/en/US/partner/docs/interfaces_modules/port_adapters/install_upgrade/pos/pa-po
s-oc3_install_config/paposoc3.html
Shared port adapter documents are also available on the Cisco Documentation DVD.
Connecting the Console and Auxiliary Port Cables
The Cisco ASR 1013 Router has a DCE-mode console port for connecting a console terminal and an
auxiliary port for additional connections to your chassis. The auxiliary port can also be used for
diagnostics.
In a fully redundant chassis, each Cisco ASR1000-RP2 is separately connected to each FP and I/O card
slot over separate point-to-point connections of the system interconnect over the midplane. The selection
of the active RP2s is made separately from the selection of the active embedded services processor.
Figure 11-11
Figure 11-11
1
2
3
Figure 11-12
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
11-26
and
Figure 11-12
Cisco ASR1000-RP2 Faceplate LEDs
CRIT
PWR
ACTV
MAJ
STAT
STBY
MIN
ASR1000-RP1
5
Internal hard drive LED
External USB Flash LED
Internal USB bootflash LED
Cisco ASR 1000 Series Route Processor Faceplate Connectors
1
2
3
CARRIER
LINK
BITS
Chapter 11
show the Cisco ASR 1000 Series Route Processor faceplate.
0
1
4
4
USB 0, USB 1 connector
5
ASR1000-RP2 LEDs
— —
4
5
MGMT ETHERNET
Cisco ASR 1013 Router Overview and Installation
1
HD
2
USB
BF
3
DISK
6
CON
AUX
OL-13208-11
Advertisement
Chapters
Table of Contents
Troubleshooting
