Table of Contents
Advertisement
Chapter 8
Cisco ASR 1002 Router Overview and Installation
Table 8-10
Cisco ASR 1002 Router –48 VDC Power Supply LEDs
LED Label
LED
OUTPUT
Power supply activity
FAIL
This section describes how to connect the –48 VDC power supply in the Cisco ASR 1002 Router.
The color coding of the –48 VDC input power supply leads depends on the color coding of the –48 VDC
Note
power source at your site. Typically, green or green/yellow is used for ground. Make certain the lead
color coding you choose for the –48 VDC input power supply matches lead color coding used at the –48
VDC power source.
Warning
When you install the unit, the ground connection must always be made first and disconnected last.
Statement 1046
Step 1
At the rear of the router, check that the power supply Standby switch is in the Standby (see
position.
Figure 8-27
1
2
OL-13208-11
Color
Red
Cisco ASR 1002 Router –48 VDC Power Supply Terminal Block Cable Connections
2
3
1
Ground lead with service loop and tie-wrap
Positive lead
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
Description
When the LED is off, it signals that the –48 VDC output voltage are
within the normal operating range. Output voltage between the
minimum and maximum limits will not create an output fail alarm,
and output voltages below the minimum or above the maximum will
create an Output Fail alarm.
Led illuminates red to indicate that the –48 VDC output is out of the
specified range.
When you turn the power supply on, the red LED illuminates for two
to three seconds to test LED operation before going off.
4
OU TP UT
INP UT
FAN
FAI L
OK
OK
Thi s uni t
mig ht hav
e mo re tha
one pow er
n
sup ply con
All con nec
nec tion .
tion s mu st
to de- ene
be rem ove
rgiz e the
d
uni t.
-4 8V /-6 0V
16 A
3
Negative lead
4
–48 VDC power supply Standby switch
Cisco ASR 1002 Router Power Supplies
Figure
8-27)
8-37
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for Cisco ASR 1000 series
Related Products for Cisco ASR 1000 series
- Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
- Cisco ASR1000-RP2 - ASR 1000 Series Route Processor 2 Router
- Cisco ASR-1000-SIP10
- Cisco ASR 1001
- Cisco ASR1002-5G-SEC/K9 - ASR 1002 VPN+FW Bundle Router
- Cisco ASR1004-20G-SEC/K9 - ASR 1004 VPN+FW Bundle Router
- Cisco ASR1002-10G-VPN/K9 - ASR 1002 VPN Bundle Router
- Cisco ASR1002-5G-HA/K9 - ASR 1002 HA Bundle Router