hit counter script

Cisco ASR 1000 series Hardware Installation Manual page 453

Aggregation services routers
Table of Contents

Advertisement

Chapter 14
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Note
Make certain that both latches on the DIMM connector are open.
Step 7
Gently insert the new DIMM, taking care not to damage the pins on the edge of the DIMM.Using two
Step 8
hands, place the index fingers on the edge of the DIMM and place the thumbs on the socket, being careful
not to touch the socket pins. Press on the back of the DIMM towards the socket by squeezing the index
fingers and the thumbs together, being careful to only apply force onto the DIMM parallel with the plane
of the DIMM.
To allow the DIMM to slide into the socket smoothly with minimum force, one can alternate applying
Step 9
force back and forth between the left hand and the right hand, allowing one side to engage prior to the
other. Carefully and firmly press the DIMM into the connector until the spring latches lock the DIMM
in place. See
Strong insertion force introduces excessive mechanical stress on the DIMM. To prevent any stress on the
Caution
soldering joints, there should be no up, down, or wiggling motion to be done on the DIMM during the
insertion. Forcing the DIMM into the socket can damage the DIMM. Check that the notches on the
DIMM are properly aligned with the ones on the connector before fully inserting the DIMM.
OL-13208-11
Hold the DIMM with two hands at its edge and insert the card.
Figure
14-12.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
Removing and Replacing the Cisco ASR 1000 Series DIMM Memory Modules
14-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asr 1000 series

Table of Contents