Table of Contents
Advertisement
Removing and Replacing the Cisco ASR 1002 Router Power Supplies
After inserting the ground wire leave an extra service loop in the ground lead to ensure that the ground
Step 11
lead is the last lead to disconnect from the power supply if a great deal of strain is placed on all three
leads as shown in
Figure 14-68
3
1
Ground lead wire with service loop
2
Negative lead wire
3
Positive lead wire
After tightening the receptacle screw for the ground, and leaving the extra service loop in the ground
Step 12
lead, use a cable tie to secure the three leads to the power supply faceplate tie-wrap tab as shown in
Figure
Turn on the branch source breaker.
Step 13
Place the power supply standby switch to the On (|) position. The power supply LEDs light when power
Step 14
is supplied to the router.
This completes the steps for installing the +24 VDC power supply in the Cisco ASR 1002 Router.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
14-92
Figure
14-68, callout 1.
Cisco ASR 1002 Router +24 VDC Power Supply Terminal Block Service Loop
2
5
14-68, callout 5.
Chapter 14
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
4
O U TP U
T IN P U
T
FA N
FA IL
O K
O K
Th is un
it m ig ht
ha ve m
on e po
w er su
or e th an
pp ly co
A ll co nn
nn ec tio
ec tio ns
n.
to de -e
m us t be
ne rg iz e
re m ov ed
th e un it.
+ 2 7 V D
C IN P U
T
+ 2 7 V
3 2 A
1
4
+24 VDC power supply Standby switch
5
Power supply tabs
— —
5
OL-13208-11
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for Cisco ASR 1000 series
Related Products for Cisco ASR 1000 series
- Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
- Cisco ASR1000-RP2 - ASR 1000 Series Route Processor 2 Router
- Cisco ASR-1000-SIP10
- Cisco ASR 1001
- Cisco ASR1002-5G-SEC/K9 - ASR 1002 VPN+FW Bundle Router
- Cisco ASR1004-20G-SEC/K9 - ASR 1004 VPN+FW Bundle Router
- Cisco ASR1002-10G-VPN/K9 - ASR 1002 VPN Bundle Router
- Cisco ASR1002-5G-HA/K9 - ASR 1002 HA Bundle Router