Table of Contents
Advertisement
Using the RM-B750
When the RM-B750 Remote Control Unit
(optional) is connected, you can control the menu
settings of the unit and monitor the camera
images on the display of the RM-B750.
Connection
Using the remote control cable supplied with the
RM-B750, connect the CAMERA connector of
the RM-B750 and the REMOTE connector of the
unit.
RM-B750
Operating the Camera Menu
You can display and operate the Camera menu of
this unit on the display of the RM-B750.
Settings on this unit
Make the following settings in the Camera menu.
• Set RM VIDEO to VBS on the <MONITOR
OUTPUT> page of the USER (OPERATION)
menu.
198
Using the RM-B750
Appendixes
This unit
• Set VBS of CHAR to ON on the <CHAR/
MARK MIX> page of the USER
(OPERATION) menu.
Settings on the RM-B750
MONITOR button
MAINTENANCE menu [RM Config]
MAINTENANCE/VF MENU button
1
Press the MAINTENANCE/VF MENU
button to display the maintenance menu
on the LCD/touch panel.
2
Press [RM Config] on the touch panel to
display the RM configuration menu.
3
Press [Security] to set the unit to
Engineering Mode.
4
Press [SW Setting] to change to the SW
Setting display and set the VF Menu to
Control Enable.
5
Press [Exit] to cancel the menu mode.
If you press the MONITOR button, a menu page
of this unit will be displayed on the display of the
RM-B750. Pressing the MAINTENANCE/VF
MENU button enables the menus of the unit to be
set from the RM-B750.
For details on the operations, refer to the Operation
Manual for the RM-B750.
Advertisement
Table of Contents
