Show Power Inline - Cisco catalyst 3750 Command Reference Manual
Hide thumbs
Also See for catalyst 3750:
- Software configuration manual (926 pages) ,
- Command reference manual (854 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
show power inline
Use the show power inline user EXEC command to display the Power over Ethernet (PoE) status for the
specified PoE port or for all PoE ports.
Syntax Description
interface-id
consumption
module switch-number
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.1(19)EA1
12.2(25)SEC
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show power inline command. In the display, port 2 is configured
as static; power has been pre-allocated to this port, but no powered device is connected. Port 6 is a static
port in the power-deny state because its maximum wattage is configured for 10 W. The connected
powered device has a reported class maximum wattage for a Class 0 or Class 3 device.
describes the output fields.
Switch> show power inline
Module
------
1
2
Interface Admin
--------- ------ ---------- ------- ------------------- ----- ----
Fa1/0/1
Fa1/0/2
OL-8552-07
show power inline [[interface-id | consumption ] | module switch-number] [ | {begin | exclude |
include} expression]
(Optional) Display PoE-related power management information for the
specified interface.
(Optional) Display the power allocated to devices connected to PoE ports.
(Optional) Limit the display to ports on the specified stack member. The
switch number is 1 to 9.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
The consumption keywords were added.
Available
Used
(Watts)
(Watts)
---------
--------
370.0
114.9
370.0
34.3
Oper
auto
on
static off
Remaining
(Watts)
---------
255.1
335.
Power
Device
(Watts)
6.3
IP Phone 7910
15.4
n/a
Catalyst 3750 Switch Command Reference
show power inline
Table 2-35
Class Max
n/a
15.4
n/a
15.4
2-697
- Quick Links:
- Cli Command Modes
Hide quick links:
Advertisement
Chapters
Table of Contents
