Show Vlan - Cisco catalyst 3750 Command Reference Manual
Hide thumbs
Also See for catalyst 3750:
- Software configuration manual (926 pages) ,
- Command reference manual (854 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
show vlan
show vlan
Use the show vlan user EXEC command to display the parameters for all configured VLANs or one
VLAN (if the VLAN ID or name is specified) on the switch.
Syntax Description
brief
dot1q tag native
id vlan-id
internal usage
mtu
name vlan-name
private-vlan
type
remote-span
summary
| begin
| exclude
| include
expression
Though visible in the command-line help string, the ifindex keyword is not supported.
Note
Command Modes
User EXEC
Command History
Release
12.1(11)AX
Catalyst 3750 Switch Command Reference
2-726
show vlan [brief | dot1q tag native | id vlan-id | internal usage | mtu | name vlan-name |
private-vlan [type] | remote-span | summary] [ | {begin | exclude | include} expression]
(Optional) Display one line for each VLAN with the VLAN name, status,
and its ports.
(Optional) Display the IEEE 802.1Q native VLAN tagging status.
(Optional) Display information about a single VLAN identified by VLAN ID
number. For vlan-id, the range is 1 to 4094.
(Optional) Display a list of VLANs being used internally by the switch.
These VLANs are always from the extended range (VLAN IDs 1006 to
4094), and you cannot create VLANs with these IDS by using the vlan
global configuration command until you remove them from internal use.
(Optional) Display a list of VLANs and the minimum and maximum
transmission unit (MTU) sizes configured on ports in the VLAN.
(Optional) Display information about a single VLAN identified by VLAN
name. The VLAN name is an ASCII string from 1 to 32 characters.
(Optional) Display information about configured private VLANs, including
primary and secondary VLAN IDs, type (community, isolated, or primary)
and ports belonging to the private VLAN. This keyword is only supported if
your switch is running the IP services image, formerly known as the
enhanced multilayer image (EMI).
(Optional) Display only private VLAN ID and type.
(Optional) Display information about Remote SPAN (RSPAN) VLANs.
(Optional) Display VLAN summary information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
OL-8552-07
- Quick Links:
- Cli Command Modes
Hide quick links:
Advertisement
Chapters
Table of Contents
