Cisco NCS 5000 Series Manual page 109
System management configuration guide for cisco ncs 5000 series
routers
Hide thumbs
Also See for NCS 5000 Series:
- Hardware installation manual (72 pages) ,
- Manual (186 pages)
Table of Contents
Advertisement
Configuring Flexible Command Line Interface
interface TenGigE0/2/0/0.3524
address-family ipv4 unicast
!
!
interface TenGigE0/2/0/0.3525
address-family ipv4 unicast
!
!
interface TenGigE0/2/0/0.3526
!
interface TenGigE0/2/0/0.3527
!
interface TenGigE0/2/0/0.3528
!
interface TenGigE0/2/0/1
address-family ipv4 unicast
!
!
!
2 Configure two ISIS groups and apply these to the configuration:
RP/0/RP0/CPU0:router# show running group isis
group isis
router isis '.*'
address-family ipv4 unicast
mpls traffic-eng level-1-2
mpls traffic-eng router-id Loopback0
redistribute connected
redistribute ospf 1 level-1-2
!
interface 'TenGig.*'
lsp-interval 40
hello-interval 15
address-family ipv4 unicast
!
!
interface 'Bundle-Ether.*'
address-family ipv4 unicast
!
!
!
end-group
RP/0/RP0/CPU0:router# show running group isis2
group isis2
router isis '.*'
!
router isis '^(vink)'
address-family ipv4 unicast
!
interface '(^Ten)Gig.*'
!
interface '^(Ten)Gig.*'
address-family ipv4 unicast
!
!
!
end-group
RP/0/RP0/CPU0:router# show running | inc apply-group
Building configuration...
apply-group isis
metric 50
metric 55
metric 66
l2tr
isis2
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
ISIS Hierarchical Configuration: Example
mpp
bundle1
acref
99
Hide quick links:
Advertisement
Table of Contents
