Cisco NCS 5000 Series Manual page 121
System management configuration guide for cisco ncs 5000 series
routers
Hide thumbs
Also See for NCS 5000 Series:
- Hardware installation manual (72 pages) ,
- Manual (186 pages)
Table of Contents
Advertisement
Upgrading FPD
Command or Action
Example:
RP/0/RP0/CPU0:router# admin
Step 3
showfpdpackage
Example:
RP/0/RP0/CPU0:router#(admin) show fpd package
Step 4
upgrade hw-module fpd {all | fpga-type} [ force] location [all
| node-id] [reload]
Example:
RP/0/RP0/CPU0:router(admin)# upgrade hw-module fpd
all location 0/3/1
.
.
.
Successfully upgraded 1 FPD for SPA-2XOC48POS/RPR
on location 0/3/1
RP/0/RP0/CPU0:router(admin)# upgrade hw-module fpd
fpga2 location 0/4/cpu0
.
.
.
Starting the upgrade/download of following FPD:
=========== ==== ======= ======= =========== =========
Location
Type Subtype Upg/Dng
=========== ==== ======= ======= =========== =========
0/4/CPU0
lc
------------------------------------------------------
Successfully upgraded fpga2 for A9K-ISM-100 on
location 0/4/CPU0 from 0.04 to 2.12
Current
Version
fpga2
upg
0.04
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
Purpose
Displays which cards are supported with your current
Cisco IOS XR software release, which FPD image you need
for each card, and what the minimum hardware
requirements are for the varioius modules. (A minimum
hardware requirement version of 0.0 indicates that all
hardware can support this FPD image version.)
If there are multiple FPD images for your card, use this
command to determine which FPD image to use if you want
to upgrade only a specific FPD type.
Upgrades all the current FPD images that must be upgraded
on the specified card with new images.
Before continuing to the next step, wait for confirmation
that the FPD upgrade has successfully completed. Status
messages, similar to these, are displayed to the screen until
the FPD upgrade is completed:
FPD upgrade started.
FPD upgrade in progress..
FPD upgrade in progress..
FPD upgrade sent to location xxxx
FPD upgrade sent to location yyyy
FPD upgrade in progress..
FPD upgrade finished for location xxx
FPD upgrade in progress..
FPD upgrade finished for location yyyy
Upg/Dng
Version
FPD upgrade completed.
2.12
The "FPD upgrade in progress." message is printed every
minute. These logs are information logs, and as such, are
displayed if the logging console informational command
is configured.
Note
The reload keyword causes the SPA or SIP to be
reloaded after the FPD image has been updated,
which interrupts traffic transmission. If you do not
use the reload keyword, you must manually reload
the SPA or SIP as described in the FPD upgrade.
If Ctrl-C is pressed while the FPD upgrade is in progress,
the following warning message is displayed:
FPD upgrade in progress on some hardware,
aborting now is not recommended as it might
cause HW programming failure and result in
RMA of the hardware.
How to Upgrade FPD Images
111
Hide quick links:
Advertisement
Table of Contents
