How To Implement Physical And Virtual Terminals On Cisco Ios Xr Software; Modifying Templates - Cisco NCS 5000 Series Manual
System management configuration guide for cisco ncs 5000 series
routers
Hide thumbs
Also See for NCS 5000 Series:
- Hardware installation manual (72 pages) ,
- Manual (186 pages)
Table of Contents
Advertisement
How to Implement Physical and Virtual Terminals on Cisco IOS XR Software
How to Implement Physical and Virtual Terminals on Cisco IOS
XR Software
Modifying Templates
This task explains how to modify the terminal attributes for the console and default line templates. The terminal
attributes that you set will modify the template settings for the specified template.
SUMMARY STEPS
1. configure
2. line {console | default}
3. Configure the terminal attribute settings for the specified template using the commands in line template
configuration mode.
4. Use one of the following commands:
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
line {console | default}
Example:
RP/0/RP0/CPU0:router(config)# line
console
or
RP/0/RP0/CPU0:router(config)# line
default
Step 3
Configure the terminal attribute settings for
the specified template using the commands in
line template configuration mode.
Step 4
Use one of the following commands:
• end
• commit
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
10
• end
• commit
Purpose
Enters line template configuration mode for the specified line template.
• console —Enters line template configuration mode for the console
template.
• default —Enters line template configuration mode for the default
line template.
—
Saves configuration changes.
• When you issue the end command, the system prompts you to
commit changes:
Uncommitted changes found, commit them
Implementing Physical and Virtual Terminals
Hide quick links:
Advertisement
Table of Contents
