Details On The Toggle Field - Siemens SINUMERIK 828D Commissioning Manual
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Operating manual (926 pages) ,
- Programming manual (822 pages)
Table of Contents
Advertisement
Variables
5.12 Details on the toggle field
5.12
Details on the toggle field
Description
The toggle field extension function displays texts (entries in toggle field) as a function of NC/
PLC variables. A variable, which makes use of a toggle field extension, is read-only. The list
of the toggle field is opened by pressing the ENTER key.
Programming
Syntax:
Description:
Parameter:
Toggle-field-dependent displays
The toggle field is overlaid with graphics, which change depending on the value of the memory
byte. If the value of the memory byte is 1, "image1.png" will appear. If it is 2, "image2.png" will
appear.
DEF VAR1=(IDB/*1="\\image1.png", 2="\\image2.png"//,$85000/wr1//"MB[130]"//160,40,50,50)
The size and position of the image is defined under "Position of IO field (left, top, width, height)".
Virtual toggle key
There is no list for toggle fields without configured list, e.g. DEF NoTglList=(R/*). The next
element is not generated until the toggle key is actuated or the associated CHANGE() method
of the corresponding variable run through.
In this case, a small virtual keyboard (comprising only a toggle key) is displayed on the right
next to the variable toggle field for operation with a touch panel.
The display of the virtual toggle key can also be forced via the following entry in the
configuration file slguiconfig.ini irrespective of a touch panel.
[VirtualKeyboard]
78
DEF VAR1=(IB/+ $85000/15////"DB90.DBB5") or
DEF VAR_TGL = (S/* "Hello", "Run", "MyScreens"/"Run")
When the dialog is opened, the content of text number $85015 is displayed in the
IO field. Default value 15 is entered in system variable DB90.DBB5. If the value
saved in system variable DB90.DBB5 changes, the displayed text number $(85000
+ <DB90.DBB5>) is recalculated in response to every change.
Variable type
Type of variables specified in the system or user variable.
Text number
Number (basis) of the language-specific text valid as the
basis number.
System or user varia‐
System or user variable (offset) via which the final text
ble
number (basis + offset) is displayed.
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
- Quick Links:
- Cnc Commissioning
Hide quick links:
Advertisement
Chapters
Table of Contents
