Table of Contents
Advertisement
Connection with SICAM PQS
3.1 General
3.1
General
The data acquired by SICAM Q100 are stored in the internal memory of the device. The data of the measured
value recorder, for example mean values, and of the trend recorder are available in the PGDIF data format.
The data of the fault recorder are saved in the COMTRADE data format. This data can be transferred to SICAM
PQS using the IEC 61850 Ed.2 protocol.
The SICAM PQS software, version V8.03 and higher, allows importing the data into the SICAM PQS archive.
Once the data has been transferred into the SICAM PQS archive, it can be used for further evaluations such
as reporting, export, etc.
SICAM PQ Analyzer or SIGRA allow displaying the data in graphical or numerical form and analyzing them.
For example, evaluations of the records and reports can be performed according to the EN 50160 standard or
other grid codes.
The following diagram shows the sequence of the parameterization and the analysis:
Figure 3-1
98
Workflow
SICAM Q100, 7KG95xx, System Manual
E50417-C1040-C522-A8, Edition 09.2020
Hide quick links:
Advertisement
Table of Contents
