hit counter script

Specifications; General Specification - Mitsubishi Electric AJ65BT-68TD User Manual

Thermocouple temperature input module
Table of Contents

Advertisement

3. SPECIFICATIONS

3.
SPECIFICATIONS
3.1

General Specification

Item
Ambient operating
temperature
Ambient storage temperature
Ambient operating humidity
Ambient storage humidity
Vibration resistance
Shock resistance
Operating ambience
Operating elevation*3
Installation location
Over voltage category *1
Pollution level *2
Downloaded from
ManualsNet.com
This section explains the AJ65BT-68TD the general specifications, performance specifications, and
transmission specifications.
This section explains the AJ65BT-68TD general specifications.
For intermittent
Conforming to
vibration
JIS B 3502,
IEC 61131-2
For continuous
vibration
*1 : This indicates the section of the power supply to which the equipment is assumed to be
connected between the public electrical power distribution network and the machinery within the
premises. Category II applies to equipment for which electrical power is supplied from fixed
facilities. The surge voltage withstand level for up to the rated voltage of 300 V is 2500 V.
*2 : This index indicates the degree to which conductive material is generated in terms of the
environment in which the equipment is used. Pollution level 2 is when only non-conductive
pollution occurs. A temporary conductivity caused by condensation must be expected
occasionally.
*3 : Do not use or store the programmable controller under pressure higher than the atmospheric
pressure of altitude 0m.
Doing so can cause a malfunction.
When using the programmable controller under pressure, please contact your sales
representative.
search engine
Specifications
°
0 to 55
C
-20 to 75
°
C
10 to 90 %RH, Non-condensing
10 to 90 %RH, Non-condensing
Frequency
Acceleration
5 to 9Hz
9 to 150Hz
9.8 m/s
5 to 9Hz
9 to 150Hz
4.9 m/s
Conforming to JIS B 3502, IEC 61131-2
2
(147 m/s
(15 G), 3 times in each of 3 directions X Y Z)
No corrosive gases
2000 m (6562 ft.) max.
Control panel
II max.
2 max.
3-1
MELSEC-A
Amplitude
Sweep count
3.5mm
10 times each in
(0.14inches)
2
(1 G)
1.75mm
(0.069inches)
2
(0.5 G)
X, Y, Z
directions

Advertisement

Table of Contents
loading

Table of Contents