hit counter script

Mitsubishi Electric AJ65BT-68TD User Manual page 43

Thermocouple temperature input module
Table of Contents

Advertisement

4. SETTING AND PROCEDURE BEFORE OPERATION
No.
Name
UP/DOWN
switch
UP
5)
DOWN
Reset switch
RESET
6)
LED for
operation
status display
PW
RUN
7)
L RUN
SD
RD
L ERR.
8)
Terminal block
Temperature-
measuring
resistor Pt 100
9)
Downloaded from
ManualsNet.com
Increase/decrease the offset value/gain value of the channel selected by the mode switch.
ON for less than 1.5 seconds : increase/decrease 0.025 °C at a time.
ON for more than 1.5 seconds : increase/decrease 0.1 °C per 0.04 seconds.
Hardware reset
Initialize the remote register and operation processing of AJ65BT-68TD.
The initial data processing request flag turns on by turning the switch on.
ON : Power is on
PW
OFF : Power is off
ON
Normal
Flicker : Read data error occurred
mode
OFF
Flickers : When the offset/gain setting switch is set at OFFSET or GAIN
Test mode
RUN
OFF: The offset/gain setting switch is set at SET
ON : Normal communication
L RUN
OFF : Communication disconnected (time over error)
SD
Turns on during data transmission
RD
Turns on during data receiving
ON
: Communication data error (CRC error)
Station number, baud rate switch setting error
L ERR.
Flicker : Station number or baud rate switch is changed
OFF
: Normal communication
1
DA
2
DB
The temperature-measuring resistor to measure the terminal block temperature. (Supplied with the module)
search engine
Description
: Normal operation
: 24 V DC power failure or WDT error
Flickers at 0.5-second intervals during normal error compensation
Flickers at 0.1-second intervals when the following invalid error compensation has
been attempted:
• A temperature conversion value out of the temperature input range was set.
• Setting was made so that the gain value minus the offset value is smaller
than 10°C.
∗ In this case, the offset or gain value will not be set even if the offset/gain
setting switch is set at SET.
3
5
7
9
11
13
15
17
CH1+
CH2+
CH3+
CH4+
CH5+
DG
+24V
24G
4
6
8
10
12
14
16
CH1-
CH2-
CH3-
CH4-
CH5-
SLD
(FG)
4-4
19
21
23
25
27
CH6+
CH7+
CH8+
RTD
RTD
18
20
22
24
26
CH6-
CH7-
CH8-
MELSEC-A

Advertisement

Table of Contents
loading

Table of Contents