Table of Contents
Advertisement
5. PROGRAMMING
Downloaded from
ManualsNet.com
(3) Initial setting
Setting item
CH. 1 sampling processing/travel average
processing designation flag (RY08)
CH. 2 sampling processing/travel average
processing designation flag (RY09)
All CH. batch "K" type thermocouple
selection flag (RY50)
Pt100 cold junction compensation disable
flag (RY57)
Offset/gain value selection flag (RY77)
CH.1 Lower limit value (0.1
CH.1 Upper limit value (0.1
CH.2 Lower limit value (0.1
CH.2 Upper limit value (0.1
(4) Other settings
Setting item
CH. 1 conversion enable flag (RY00)
CH. 2 conversion enable flag (RY01)
search engine
Travel average processing
Travel average processing
"K" type thermocouple for all channels
Cold junction compensation is performed by
the Pt100 temperature-measuring resistor.
Factory setting
°
C units) (RWw0)
0
°
C units) (RWw1)
5000
°
C units) (RWw2)
0
°
C units) (RWw3)
5000
Conversion enable
Conversion enable
5-4
MELSEC-A
Description
Description
Advertisement
Table of Contents
