Table of Contents
Advertisement
4-12.
CN-3853 Board
Preparation
1.
Remove the inside panel assembly. (Refer to
2.
Remove the front panel assembly. (Refer to
Procedure
1.
Remove the screw, and pull out the CN-3853 board.
2.
Disconnect the harness from the connector (CN002) on the CN-3853 board, and then remove the CN-3853 board.
3.
Remove the lens CN cushion.
Harness
4.
Install the removed parts by reversing the steps of removal.
HXC-FB75H/HXC-FB75KC
"4-4-1. Inside Panel
"4-5-1. Front Panel
CN002
Lens CN cushion
CN-3853 board
Assembly")
Assembly")
PSW2 x 5
4-31
Advertisement
Table of Contents
