Table of Contents
Advertisement
4-24.
CN-3860 Board
Preparation
1.
Remove the inside panel assembly. (Refer to
2.
Remove the bottom cover. (Refer to
3.
Remove the CN-3861 board. (Refer to
4.
Remove the CN-3859 board. (Refer to
Procedure
1.
Disconnect the harness from the connector (CN015) on the AU-374 board.
Bottom view
CN015
2.
Remove the four screws, and pull out the rear connector panel.
3.
Remove the screw, and remove the CN-3860 board.
4.
Disconnect the harness from the connector (CN001) on the CN-3860 board.
5.
Install the removed parts by reversing the steps of removal.
HXC-FB75H/HXC-FB75KC
"4-4-1. Inside Panel
"4-10. Battery Connector
"4-22. CN-3861
Board")
"4-23. CN-3859
Board")
AU-374 board
Harness
CN-3860 board
CN001
PSW2 x 5
Assembly")
Assembly")
Rear connector panel
Harness
2.6 x 5
2.6 x 5
4-48
Advertisement
Table of Contents
