Pcmcia Card Slots; Pre Led Indicators And Switches - Cisco 10008 Hardware Installation Manual
Hardware installation guide
Hide thumbs
Also See for 10008:
- Quick start manual (49 pages) ,
- Software configuration manual (624 pages) ,
- Installation and configuration manual (70 pages)
Table of Contents
Advertisement
Cisco 10008 Router Hardware Description
PCMCIA Card Slots
Two PCMCIA Type II card slots can store the Cisco IOS image or a system configuration file on a flash
memory card. The system can also boot from the software stored on the flash memory card. See
"Figure 5-47Removing the PCMCIA Flash Card" section on page 5-45
inserting and removing flash cards from the PRE.
PRE LED Indicators and Switches
LEDs on the front panel of the PRE provide a visual indication showing the status of PRE operation (see
Figure
•
•
•
Alarm relay contacts on the Cisco 10008 router let you connect the router to a site alarm maintenance
system. This allows critical, major, and minor alarms generated by the Cisco 10008 router to be
displayed on both the PRE front panel and to external visual or audible alarms connected to the system.
See the
connections.
Pressing the alarm cutoff (ACO) switch on the (primary) PRE during an alarm condition shuts off the
external alarm, but does not deactivate the alarm LEDs on the PRE front panel. Alarm LEDs on the front
panel are deactivated only after the condition that caused the alarm is corrected.
Table 1-3
Table 1-3
LEDs/Switch
Ethernet Port LEDs:
Activity
Link
PCMCIA slot 0
PCMCIA slot 1
Critical, Major, and Minor LEDs
Alarm cutoff (ACO) switch
Cisco 10008 Router Hardware Installation Guide
1-10
1-6). The LEDs are separated into three categories:
alarms
status
failure
"Connecting Alarm Indicators" section on page 3-26
describes the LEDs and switch on the PRE.
LEDs and Cutoff Switch
Chapter 1
for more information about
for more information about alarm
Status
Description
Green
Packets are being transmitted and
received.
Off
No packet activity.
Green
Carrier detected; the port is able to pass
traffic.
Off
No carrier detected; the port is not able to
pass traffic.
Green
Flash card in Slot 0 is active.
Green
Flash card in Slot 1 is active.
Off
No alarm.
Yellow
Indicates an alarm condition.
—
Pressing this switch disables an audible
alarm.
Cisco 10008 Router Overview
OL-0659-13
- Quick Links:
- Chapter 1 Cisco 10008 Router Overview
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
