Catalyst 6513-E Switch - Cisco 6503 - Catalyst Firewall Security Sys Installation Manual
Installation guide
Hide thumbs
Also See for 6503 - Catalyst Firewall Security Sys:
- White paper (19 pages) ,
- Product bulletin (6 pages) ,
- Supplementary manual (3 pages)
Table of Contents
Advertisement
Chapter 1
Product Overview
Table 1-22
Catalyst 6513 Switch Specifications (continued)
Item
Physical characteristics
Dimensions (H x W x D)
Weight
Airflow
1. RU = rack units
Catalyst 6513-E Switch
The Catalyst 6513-E switch is a 13-slot horizontal chassis supporting redundant power supplies,
redundant supervisor engines, and slots for up to twelve modules. The chassis is NEBS L3 compliant.
Figure 1-15
OL-5781-08
Specification
33.3 x 17.2 x 18.1 in. (84.6 x 43.7 x 46.0 cm).
•
Chassis requires 20 RU
•
The Catalyst 6513 switch chassis is designed to install in standard
•
19-inch equipment racks that meet ANSI/EIA 310-D, IEC 60297, and
ETS 300-119 standards.
Chassis fully configured with 2 supervisor engines, 11 switching modules,
and 2 power supplies: 280 lb (127 kg).
WS-C6K-13SLOT-FAN (Standard fan tray)—641 CFM
•
WS-C6K-13SLT-FAN2 (Optional high-speed fan tray)—1090 CFM
•
Note
To maintain proper air circulation through the Catalyst switch
chassis, we recommend that you maintain a minimum 6-inch (15 cm)
separation between a wall and the chassis air intake or a wall and the
chassis air exhaust. You should also allow a minimum separation of
12 inches (30.5 cm) between the hot air exhaust on one chassis and
the air intake on another chassis. Failure to maintain adequate air
space can cause the chassis to overheat and the system to fail. On
Catalyst chassis in which the airflow is from front to back, the
chassis may be placed side-by-side.
shows a front view of the Catalyst 6513-E switch chassis.
1
.
Catalyst 6500 Series Switches Installation Guide
Catalyst 6513-E Switch
1-67
Advertisement
Table of Contents
Troubleshooting
