L Brackets On The Catalyst 6509-Neb-A Switch Chassis - Cisco 6503 - Catalyst Firewall Security Sys Installation Manual
Installation guide
Hide thumbs
Also See for 6503 - Catalyst Firewall Security Sys:
- White paper (19 pages) ,
- Product bulletin (6 pages) ,
- Supplementary manual (3 pages)
Table of Contents
Advertisement
Chapter 3
Installing the Switch
The L brackets can also be reversed and installed on the rear of the chassis as an alternative method of
Note
installation.
The Catalyst 6509-NEB L bracket screw holes are stamped + and –. You can install the brackets on either
Note
the left or right side of the chassis; use the + holes on one side and the – holes on the other side.
The optional cable guide attaches to the front of the chassis using four M4 screws supplied in the
accessory kit. (See
Figure 3-11
M4 screws
L Brackets on the Catalyst 6509-NEB-A Switch Chassis
The Catalyst 6509-NEB-A switch chassis is shipped with the two L brackets installed on the front sides
of the chassis. The L brackets are secured to the chassis with 14 M3 Phillips-head countersunk screws
(seven screws on each side) as shown in
the chassis if necessary.
OL-5781-08
Figure
3-11.)
L Brackets and Cable Guide Attachment on the Catalyst 6509-NEB Switch Chassis
L bracket
FAN
STATUS
Cable
guide
Installing a Catalyst 6509-NEB or Catalyst 6509-NEB-A Switch Chassis
L bracket
Figure
3-12. These brackets can also be installed on the rear of
Catalyst 6500 Series Switches Installation Guide
3-27
Advertisement
Table of Contents
Troubleshooting
