Cisco IE-3000-8TC Command Reference Manual page 416
Command reference
Hide thumbs
Also See for IE-3000-8TC:
- Software configuration manual (874 pages) ,
- Administration manual (496 pages) ,
- Message manual (98 pages)
Table of Contents
Advertisement
show ip igmp snooping
Vlan 1:
--------
IGMP snooping
Immediate leave
Multicast router learning mode
Source only learning age timer
CGMP interoperability mode
Last member query interval : 100
This is an example of output from the show ip igmp snooping command. It displays snooping
characteristics for all VLANs on the switch.
Switch> show ip igmp snooping
Global IGMP Snooping configuration:
-----------------------------------
IGMP snooping
IGMPv3 snooping (minimal)
Report suppression
TCN solicit query
TCN flood query count
Last member query interval : 100
Vlan 1:
--------
IGMP snooping
Immediate leave
Multicast router learning mode
Source only learning age timer
CGMP interoperability mode
Last member query interval
Vlan 2:
--------
IGMP snooping
Immediate leave
Multicast router learning mode
Source only learning age timer
CGMP interoperability mode
Last member query interval
<output truncated>
Cisco IE 3000 Switch Command Reference
2-390
:Enabled
:Disabled
:pim-dvmrp
:10
:IGMP_ONLY
: Enabled
: Enabled
: Enabled
: Disabled
: 2
:Enabled
:Disabled
:pim-dvmrp
:10
:IGMP_ONLY
: 100
:Enabled
:Disabled
:pim-dvmrp
:10
:IGMP_ONLY
: 333
Chapter 2 IE 3000 Switch Cisco IOS Commands
OL-13019-01
Advertisement
Table of Contents
