Cisco IE-3000-8TC Command Reference Manual page 41
Command reference
Hide thumbs
Also See for IE-3000-8TC:
- Software configuration manual (874 pages) ,
- Administration manual (496 pages) ,
- Message manual (98 pages)
Table of Contents
Advertisement
Chapter 2
IE 3000 Switch Cisco IOS Commands
source-url
Defaults
The current software image is not overwritten with the downloaded image.
Both the software image and HTML files are downloaded.
The new image is downloaded to the flash: file system.
The BOOT environment variable is changed to point to the new software image on the flash: file system.
Image names are case sensitive; the image file is provided in tar format.
Command Modes
Privileged EXEC
Command History
Release
12.2(44)EX
Usage Guidelines
The /imageonly option removes the HTML files for the existing image if the existing image is being
removed or replaced. Only the Cisco IOS image (without the HTML files) is downloaded.
Using the /safe or /leave-old-sw option can cause the new image download to fail if there is insufficient
flash memory. If leaving the software in place prevents the new image from fitting in flash memory due
to space constraints, an error results.
If you used the /leave-old-sw option and did not overwrite the old image when you downloaded the new
one, you can remove the old image by using the delete privileged EXEC command. For more
information, see the
OL-13019-01
The source URL alias for a local or network file system. These options are
supported:
The syntax for the secondary boot loader (BS1):
•
bs1:
The syntax for the local flash file system:
•
flash:
The syntax for the FTP:
•
ftp:[[//username[:password]@location]/directory]/image-name.tar
The syntax for an HTTP server:
•
http://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
•
The syntax for a secure HTTP server:
https://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
The syntax for the Remote Copy Protocol (RCP):
•
rcp:[[//username@location]/directory]/image-name.tar
The syntax for the TFTP:
•
tftp:[[//location]/directory]/image-name.tar
The image-name.tar is the software image to download and install on the
switch.
Modification
This command was introduced.
"delete" section on page
2-72.
archive download-sw
Cisco IE 3000 Switch Command Reference
2-15
Advertisement
Table of Contents
