Debug Platform Dot1X - Cisco IE-3000-8TC Command Reference Manual
Command reference
Hide thumbs
Also See for IE-3000-8TC:
- Software configuration manual (874 pages) ,
- Administration manual (496 pages) ,
- Message manual (98 pages)
Table of Contents
Advertisement
Appendix B
IE 3000 Switch Debug Commands
debug platform dot1x
Use the debug platform dot1x privileged EXEC command to enable debugging of IEEE 802.1x events.
Use the no form of this command to disable debugging.
Syntax Description
initialization
interface-configuration
rpc
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(44)EX
Usage Guidelines
The undebug platform dot1x command is the same as the no debug platform dot1x command.
Related Commands
Command
show debugging
OL-13019-01
debug platform dot1x {initialization | interface-configuration | rpc}
no debug platform dot1x {initialization | interface-configuration | rpc}
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Display IEEE 802.1x-authentication initialization sequence debug
messages.
Display IEEE 802.1x interface configuration-related debug messages.
Display IEEE 802.1x remote procedure call (RPC) request debug
messages.
Cisco IE 3000 Switch Command Reference
debug platform dot1x
B-29
Advertisement
Table of Contents
