Cisco IE-3000-8TC Command Reference Manual page 601

Command reference

Hide thumbs Also See for IE-3000-8TC:

Table of Contents

Chapter 2 IE 3000 Switch Cisco IOS Commands

This example sets the aging time as 2 hours for absolute aging for all the secure addresses on the port:

Switch(config)# interface gigabitethernet1/1

Switch(config-if)# switchport port-security aging time 120

This example sets the aging time as 2 minutes for inactivity aging type with aging enabled for configured

secure addresses on the port:

Switch(config)# interface gigabitethernet1/2

Switch(config-if)# switchport port-security aging time 2

Switch(config-if)# switchport port-security aging type inactivity

Switch(config-if)# switchport port-security aging static

This example shows how to disable aging for configured secure addresses:

Switch(config)# interface gigabitethernet1/2

Switch(config-if)# no switchport port-security aging static

Related Commands

show port-security

switchport port-security

Displays the port security settings defined for the port.

Enables port security on a port, restricts the use of the port to a

user-defined group of stations, and configures secure MAC addresses.

switchport port-security aging

Cisco IE 3000 Switch Command Reference