Cisco IE-3000-8TC Command Reference Manual page 620

Command reference

Hide thumbs Also See for IE-3000-8TC:

Table of Contents

If you specify trust ip-precedence, QoS uses the IP precedence value from the ingress packet and the

IP-precedence-to-DSCP map. For non-IP packets that are tagged, QoS uses the received CoS value; for

non-IP packets that are untagged, QoS uses the default port CoS value. In either case, the DSCP for the

packet is derived from the CoS-to-DSCP map.

To return to policy-map configuration mode, use the exit command. To return to privileged EXEC mode,

use the end command.

This example shows how to define a port trust state to trust incoming DSCP values for traffic classified

with class1:

Switch(config)# policy-map policy1

Switch(config-pmap)# class class1

Switch(config-pmap-c)# trust dscp

Switch(config-pmap-c)# police 1000000 20000 exceed-action policed-dscp-transmit

Switch(config-pmap-c)# exit

You can verify your settings by entering the show policy-map privileged EXEC command.

Related Commands

show policy-map

Cisco IE 3000 Switch Command Reference

Defines a traffic classification match criteria (through the police, set,

and trust policy-map class configuration commands) for the

specified class-map name.

Defines a policer for classified traffic.

Creates or modifies a policy map that can be attached to multiple

ports to specify a service policy.

Classifies IP traffic by setting a DSCP or IP-precedence value in the

Displays QoS policy maps.

Chapter 2 IE 3000 Switch Cisco IOS Commands