Shutdown Vlan - Cisco IE-3000-8TC Command Reference Manual

Command reference

Hide thumbs Also See for IE-3000-8TC:

Table of Contents

shutdown vlan

Use the shutdown vlan global configuration command to shut down (suspend) local traffic on the

specified VLAN. Use the no form of this command to restart local traffic on the VLAN.

Syntax Description

No default is defined.

Command Modes

Global configuration

Command History

Usage Guidelines

The shutdown vlan command does not change the VLAN information in the VTP database. The

command shuts down local traffic, but the switch still advertises VTP information.

This example shows how to shut down traffic on VLAN 2:

Switch(config)# shutdown vlan 2

You can verify your setting by entering the show vlan privileged EXEC command.

Related Commands

(config-vlan mode)

vlan database

Cisco IE 3000 Switch Command Reference

shutdown vlan vlan-id

no shutdown vlan vlan-id

ID of the VLAN to be locally shut down. The range is 2 to 1001. VLANs defined as

default VLANs under the VLAN Trunking Protocol (VTP), as well as

extended-range VLANs (greater than 1005) cannot be shut down. The default

VLANs are 1 and 1002 to 1005.

Modification

This command was introduced.

Shuts down local traffic on the VLAN when in config-VLAN mode (accessed

by the vlan vlan-id global configuration command).

Enters VLAN configuration mode.

Chapter 2 IE 3000 Switch Cisco IOS Commands