Show Alarm Profile - Cisco IE-3000-8TC Command Reference Manual

Command reference

Hide thumbs Also See for IE-3000-8TC:

Table of Contents

Chapter 2 IE 3000 Switch Cisco IOS Commands

show alarm profile

Use the show alarm profile user EXEC command to display all alarm profiles configured in the system

or the specified profile and the interfaces to which each profile is attached.

Syntax Description

Command Modes

Command History

Usage Guidelines

If you do not enter a profile name, the display includes the profile information for all existing alarm

profiles. This command does not display the default configuration settings.

The defaultPort profile is applied by default to all interfaces. This profile enables only the Port Not

Operating (3) alarm. You can use the alarm profile defaultPort global configuration command and

modify this profile to enable other alarms.

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

do not appear, but the lines that contain Output appear.

These are examples of output from the show alarm profile command.

This output displays all ports that are attached to the configured profiles.

Switch> show alarm profile GigE-UplinkPorts

show alarm profile [name] [ | {begin | exclude | include} expression]

(Optional) Display only the profile with the specified name.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

Cisco IE 3000 Switch Command Reference

show alarm profile