Show Alarm Profile - Cisco Catalyst 2950 Command Reference Manual
Hide thumbs
Also See for Catalyst 2950:
- Configuration manual (710 pages) ,
- Software configuration manual (674 pages) ,
- Command reference manual (408 pages)
Table of Contents
Advertisement
show alarm profile
show alarm profile
Use the show alarm profile user EXEC command to display all alarm profiles configured in the system
or the specified profile and the interfaces to which each profile is attached.
Syntax Description
name
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.1(12c)EA1
Usage Guidelines
If no profile name is entered, the display includes profile information for all existing alarm profiles.
The defaultPort profile is applied by default to all interfaces. This profile enables only the Port Not
Operating (3) alarm. You can use the alarm profile defaultPort global configuration command and
modify this profile to enable other alarms.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
A-12
show alarm profile [name] [ | {begin | exclude | include} expression]
(Optional) Display only the profile with the specified name.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix A
Catalyst 2955 Alarm Commands
OL-10102-01
Advertisement
Table of Contents
