Show Ip Igmp Snooping Querier Detail - Cisco Catalyst 2950 Command Reference Manual
Hide thumbs
Also See for Catalyst 2950:
- Configuration manual (710 pages) ,
- Software configuration manual (674 pages) ,
- Command reference manual (408 pages)
Table of Contents
Advertisement
Chapter 2
Catalyst 2950 and 2955 Cisco IOS Commands
show ip igmp snooping querier detail
Use the show ip igmp snooping querier detail user EXEC command to display the configuration and
operation information for the IGMP querier configured on a switch.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.1(22)EA3
Usage Guidelines
The show ip igmp snooping querier detail user EXEC command is similar to the show ip igmp
snooping querier command. However, the show ip igmp snooping querier only displays the IP address
of the most recent device detected by the switch querier.
The show ip igmp snooping querier command detail displays the IP address of the most recent device
detected by the switch querier along with this additional information:
•
•
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show ip igmp snooping querier detail command:
Switch> show ip igmp snooping querier detail
Vlan
-------------------------------------------------------------
1
Global IGMP switch querier status
--------------------------------------------------------
admin state
admin version
source IP address
query-interval (sec)
max-response-time (sec)
querier-timeout (sec)
tcn query count
tcn query interval (sec)
0L-10102-01
show ip igmp snooping querier detail
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
the elected IGMP querier in the VLAN
the configuration and operational information pertaining to the switch querier (if any) that is
configured in the VLAN
IP Address
IGMP Version
1.1.1.1
v2
Port
Fa8/0/1
: Enabled
: 2
: 0.0.0.0
: 60
: 10
: 120
: 2
: 10
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show ip igmp snooping
2-359
Advertisement
Table of Contents
