Show Cluster Members - Cisco Catalyst 2950 Command Reference Manual
Hide thumbs
Also See for Catalyst 2950:
- Configuration manual (710 pages) ,
- Software configuration manual (674 pages) ,
- Command reference manual (408 pages)
Table of Contents
Advertisement
show cluster members
show cluster members
Use the show cluster members privileged EXEC command on the command switch to display
information about the cluster members.
Syntax Description
n
detail
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.0(5.2)WC(1)
Usage Guidelines
You should only enter this command on a command switch.
If the cluster has no members, this command displays an empty line at the prompt.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show cluster members command. The SN in the display means
switch number.
Switch# show cluster members
SN MAC Address
0
0002.4b29.2e00 StLouis1
1
0030.946c.d740 tal-switch-1 Fa0/13
2
0002.b922.7180 nms-2820
3
0002.4b29.4400 SanJuan2
4
0002.4b28.c480 GenieTest
Switch# show cluster members
SN MAC Address
0
0404.0400.0001 Switch
(Cmdr)
1
0003.fd62.9240 b10-2940TT
This is an example of output from the show cluster members 3 command for cluster member 3:
Switch# show cluster members 3
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-284
show cluster members [n | detail] [ | {begin | exclude | include} expression]
(Optional) Number that identifies a cluster member. The range is 0 to 15.
(Optional) Display detailed information for all cluster members.
(Optional) Display begins with the line that matches the specified expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Name
Name
Chapter 2
|---Upstream---|
PortIf FEC Hops
SN PortIf
0
1
0
Gi0/1
10
0
2
1
Fa0/18
Gi0/1
2
1
Fa0/11
Gi0/2
2
1
Fa0/9
|---Upstream---|
PortIf FEC Hops
SN PortIf
0
Fa0/1
1
0
Gi0/20
Catalyst 2950 and 2955 Cisco IOS Commands
FEC
State
Up
(Cmdr)
Up
Up
Up
Up
FEC
State
Up
Up
0L-10102-01
Advertisement
Table of Contents
