Clear Controllers Lre Link Monitor - Cisco Catalyst 2950 Command Reference Manual

Hide thumbs Also See for Catalyst 2950:

Table of Contents

clear controllers lre link monitor

Use the clear controllers lre link monitor privileged EXEC command to clear Long-Reach Ethernet

(LRE) link monitor data.

This command is available only on Catalyst 2950 LRE switches.

Syntax Description

interface-id

No default is defined.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

This command clears all collected link monitor data. New entries are added when a new polling cycle

This example shows how to clear link monitor data on an LRE port:

Switch# clear controllers lre link monitor longreachethernet0/2

Related Commands

link monitor

link monitor logging

link monitor threshold snr

link monitor threshold rserr

show controllers lre link monitor

Catalyst 2950 and Catalyst 2955 Switch Command Reference

clear controllers lre link monitor interface-id

ID of the LRE switch port.

Modification

This command was introduced.

Enables the LRE link monitor on a port.

Enables link monitor event logging per port.

Sets a signal-to-noise margin for the LRE link monitor.

Sets a Reed-Solomon error threshold for the LRE link monitor.

Displays the LRE link monitor information.

Catalyst 2950 and 2955 Cisco IOS Commands

Catalyst 2955