Show Ip Igmp Snooping Querier - Cisco Catalyst 2960 Command Reference Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (788 pages)
Table of Contents
Advertisement
show ip igmp snooping querier
show ip igmp snooping querier
Use the show ip igmp snooping querier detail user EXEC command to display the configuration and
operation information for the IGMP querier configured on a switch.
Syntax Description
detail
vlan vlan-id [detail]
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(25)FX
Usage Guidelines
Use the show ip igmp snooping querier command to display the IGMP version and the IP address of a
detected device, also called a querier, that sends IGMP query messages. A subnet can have multiple
multicast routers but has only one IGMP querier. In a subnet running IGMPv2, one of the multicast
routers is elected as the querier. The querier can be a Layer 3 switch.
The show ip igmp snooping querier command output also shows the VLAN and the interface on which
the querier was detected. If the querier is the switch, the output shows the Port field as Router. If the
querier is a router, the output shows the port number on which the querier is learned in the Port field.
The show ip igmp snooping querier detail user EXEC command is similar to the show ip igmp
snooping querier command. However, the show ip igmp snooping querier command displays only the
device IP address most recently detected by the switch querier.
The show ip igmp snooping querier detail command displays the device IP address most recently
detected by the switch querier and this additional information:
•
•
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Catalyst 2960 Switch Command Reference
2-482
show ip igmp snooping querier [detail | vlan vlan-id [detail]] [ | {begin | exclude | include}
expression]
Optional) Display detailed IGMP querier information.
Optional) Display IGMP querier information for the specified VLAN. The
range is 1 to 1001 and 1006 to 4094. Use the detail keyword to display
detailed information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
The elected IGMP querier in the VLAN
The configuration and operational information pertaining to the switch querier (if any) that is
configured in the VLAN
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
OL-8604-03
- Quick Links:
- Cli Command Modes
Hide quick links:
Advertisement
Table of Contents
