Cisco Catalyst 2960 Command Reference Manual page 548

Hide thumbs Also See for Catalyst 2960:

Table of Contents

spanning-tree port-priority

This example shows how to increase the likelihood that a port will be put in the forwarding state if a

loop occurs:

Switch(config)# interface gigabitethernet0/2

Switch(config-if)# spanning-tree vlan 20 port-priority 0

This example shows how to set the port-priority value on VLANs 20 to 25:

Switch(config-if)# spanning-tree vlan 20-25 port-priority 0

You can verify your settings by entering the show spanning-tree interface interface-id privileged

EXEC command.

Related Commands

show spanning-tree

interface-id

spanning-tree cost

spanning-tree vlan

Catalyst 2960 Switch Command Reference

Displays spanning-tree information for the specified interface.

Sets the path cost for spanning-tree calculations.

Sets the switch priority for the specified spanning-tree instance.

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

Show Quick Links

Table of Contents