Snmp-Server Host - Cisco Catalyst 2960 Command Reference Manual

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

snmp-server host

Use the snmp-server host global configuration command to specify the recipient (host) of a Simple

Network Management Protocol (SNMP) notification operation. Use the no form of this command to

remove the specified host.

Syntax Description

udp-port port

informs | traps

version 1 | 2c | 3

vrf vrf-instance

snmp-server host host-addr [informs | traps] [version {1 | 2c | 3 {auth | noauth| priv}] [vrf

vrf-instance] {community-string [notification-type]}

no snmp-server host host-addr [informs | traps] [version {1 | 2c | 3 {auth | noauth | priv}] [vrf

vrf-instance] community-string

Name or Internet address of the host (the targeted recipient).

(Optional) Configure the User Datagram Protocol (UDP) port number of the

host to receive the traps. The range is 0 to 65535.

(Optional) Send SNMP traps or informs to this host.

(Optional) Version of the SNMP used to send the traps.

These keywords are supported:

1—SNMPv1. This option is not available with informs.

3—SNMPv3. These optional keywords can follow the Version 3 keyword:

(Optional) Virtual private network (VPN) routing instance and name for this

auth (Optional). Enables Message Digest 5 (MD5) and Secure Hash

Algorithm (SHA) packet authentication.

noauth (Default). The noAuthNoPriv security level. This is the default

if the [auth | noauth | priv] keyword choice is not specified.

priv (Optional). Enables Data Encryption Standard (DES) packet

encryption (also called privacy).

The priv keyword is available only when the cryptographic

(encrypted) software image is installed.

Catalyst 2960 Switch Command Reference

snmp-server host

Show Quick Links

Table of Contents