Show Controllers Utilization - Cisco Catalyst 2960 Command Reference Manual

Hide thumbs Also See for Catalyst 2960:

Table of Contents

show controllers utilization

Use the show controllers utilization user EXEC command to display bandwidth utilization on

the switch or specific ports.

Syntax Description

interface-id

Command Modes

Command History

Usage Guidelines

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

do not appear, but the lines that contain Output appear.

This is an example of output from the show controllers utilization command.

Switch> show controllers utilization

Switch Receive Bandwidth Percentage Utilization

Switch Transmit Bandwidth Percentage Utilization : 0

Switch Fabric Percentage Utilization : 0

This is an example of output from the show controllers utilization command on a specific port:

Switch> show controllers gigabitethernet0/1 utilization

Receive Bandwidth Percentage Utilization

Transmit Bandwidth Percentage Utilization

Catalyst 2960 Switch Command Reference

show controllers [interface-id] utilization [ | {begin | exclude | include} expression]

(Optional) ID of the switch interface.

(Optional) Display begins with the line that matches the specified expression.

(Optional) Display excludes lines that match the specified expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

Receive Utilization

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

Transmit Utilization

Show Quick Links

Table of Contents