Cisco Catalyst 2960 Command Reference Manual page 87

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Catalyst 2960 Switch Cisco IOS Commands

This example shows the error message when this command is executed on a cluster command switch and

the specified HSRP standby group does not exist:

Switch(config)# cluster standby-group my_hsrp

%ERROR: Standby (my_hsrp) group does not exist

This example shows the error message when this command is executed on a cluster member switch:

Switch(config)# cluster standby-group my_hsrp routing-redundancy

%ERROR: This command runs on a cluster command switch

You can verify your settings by entering the show cluster privileged EXEC command. The output shows

whether redundancy is enabled in the cluster.

Related Commands

show cluster

show standby

Enables HSRP on the interface. For syntax information, select Cisco IOS IP

Command Reference, Volume 1 of 3:Addressing and Services, Release

12.2 > IP Services Commands.

Displays the cluster status and a summary of the cluster to which the switch

Displays standby group information. For syntax information, select Cisco

IOS IP Command Reference, Volume 1 of 3:Addressing and Services,

Release 12.2 > IP Services Commands.

cluster standby-group

Catalyst 2960 Switch Command Reference

Show Quick Links

Table of Contents