Cisco Catalyst 2960 Command Reference Manual page 498
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (788 pages)
Table of Contents
Advertisement
show vtp
Table 2-32
Field
Number of configuration
digest errors
Number of V1 summary
errors
Join Transmitted
Join Received
Summary Advts Received
from non-pruning-capable
device
This is an example of output from the show vtp status command.
display.
Switch> show vtp status
VTP Version
Configuration Revision
Maximum VLANs supported locally : 1005
Number of existing VLANs
VTP Operating Mode
VTP Domain Name
VTP Pruning Mode
VTP V2 Mode
VTP Traps Generation
MD5 digest
Catalyst 2960 Switch Command Reference
2-574
show vtp counters Field Descriptions (continued)
Description
Number of MD5 digest errors.
Digest errors increment whenever the MD5 digest in the summary packet
and the MD5 digest of the received advertisement calculated by the
switch do not match. This error usually means that the VTP password in
the two switches is different. To solve this problem, make sure the VTP
password on all switches is the same.
These errors mean that the switch is filtering incoming advertisements,
which causes the VTP database to become unsynchronized across the
network.
Number of Version 1 errors.
Version 1 summary errors increment whenever a switch in VTP V2 mode
receives a VTP Version 1 frame. These errors mean that at least one
neighboring switch is either running VTP Version 1 or VTP Version 2
with V2-mode disabled. To solve this problem, change the configuration
of the switches in VTP V2-mode to disabled.
Number of VTP pruning messages sent on the trunk.
Number of VTP pruning messages received on the trunk.
Number of VTP summary messages received on the trunk from devices
that do not support pruning.
: 2
: 0
: 45
: Transparent
: shared_testbed1
: Disabled
: Disabled
: Enabled
: 0x3A 0x29 0x86 0x39 0xB4 0x5D 0x58 0xD7
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Table 2-33
describes each field in the
OL-8604-03
- Quick Links:
- Cli Command Modes
Hide quick links:
Advertisement
Table of Contents
